投稿須知

一、本期刊刊載與炸藥、推進劑及煙火有關技術的中英文稿件，依其性質分下列三類：

   1.學術論文：具創見性之研發論文與回顧性文章；

   2.短文：創新之理論或實驗結果以提要或快訊方式報導；

   3.專題報導：就特定主題作系統性之探討與展望；投稿者，請將文稿正本一份與影本二份逕寄本

      刊編輯 部。稿件經本期刊登載後，贈送投稿者論文抽印本十份。

二、除短文外稿件請附不超過200字之中文摘要，學術論文稿件請另附英文摘要。稿件以橫式自左

      至右打 字於A4紙上，四周至少應留空3公分，單行間隔(Double Space)，每頁24行，每行25

      字，文稿以不超過20頁為原則。

三、除短文外，文稿應依內容適當分段，每段編號以國字一，二，三，...表示。小節編號以(一)，

     (二)，  (三)，...表示；副節編號則以1，2，3，...表示。

四、文稿中所有公式及方程式均須打字或以黑墨書寫清楚，其後並以( )標明式號。

五、稿件中所有圖與表請和本文分開，本文中僅於相關位置標明圖或表號即可。所有圖和表均應有

      編號與標題，表標題置於表首，圖標題則統一另置於一頁。圖與表之標號分別以阿拉伯數字標

      示 。表內欄間以 空格區分而不以直線間隔。圖請以完稿形式墨繪於A4白紙上，圖中座標及其

      他 文字請用字規或打字，字 需大得(2mm以上)讓縮印時仍能清晰可辨。照片須為黑白光面。

六、文章內需引證文獻時，請在該句適當字的後方以[ ]標示序號，並於文後依次介紹。介紹時請依

        序註明 作者之姓名，論文題目，期刊或書名，卷期數或版數，頁數及出版年份。例如：

     1. 周金良、劉朝士，"過氯酸銨熱解之討論：(二)昇溫熱解"，火藥技術，5(2) 31 (1990).

2. Urbanski, T., Chemistry and Technology of Explosives, Pergamon Press, Oxford, Vol.4,

    pp.577- 585 (1984).

3. Derr, R. L. and J. R. Osborn, "Composite Propellant Combustion," AIAA J., 8(8), 1488 

   (1970).

4. Dodohara, H. A., "Process Development of a Low Vulnerability Ammunition (LOVA) Plastic 

   Binder Gun Propellant," Joint Symp. Compatibility of Plastic/Materials with Explosives

    Processing    Explosives, Blacksburg, Virginia, Oct., pp.311-323 (1980).

           七、每篇稿件請附三至五個中英文關鍵詞(Key Words)。

           八、本刊保留編審權。

Instruction to Contributors

1. The object of the Journal of Explosives and Propellants, R.O.C. is to publish papers in the broad 

    field of explosives, propellants and pyrotechnics research which may range from fundamental 

    principles to practical applications. Accepted for publication are of three basic topics:

a. Original Papers－Formal presentation of significant and completed research projects.

b. Short Communications－Brief reports which need prompt publication.

c. Special reports－General comments on established topics of explosives, propellants and 

   related.

    Three copies of the manuscripts should be submitted to editor department of the journal. Total

    10  reprints of each paper will be provided free of charge to the author.

2. Abstracts to an original paper should be clear and concise, 200 words maximum. Manuscripts 

    must  be typed with double spacing on A4 paper leaving at least 3 cm margins. Length of papers

     is not to exceed 20 pages.

3. Manuscripts should be divided into sections by headings and subheadings which are numbered 

    as 1,      2, 3 and 1.1, 1.2,...etc..

4. Equations in manuscript should be nearly typed and subsequently numbered in parentheses ( ).

5. Figures and Tables should be drawn and typed in separate sheets. Every figure and table must

    be  referred to in the text. Every table must accompanied by a leading with a consecutive 

    number.  Figure captions and legends should be typed on separate pages. The figures should be 

    carefully  designed and prepared. The quality of the figures should be such that they can be 

    reproduced   directly. Numbers, letters and symbols inscribed must be large enough to be still 

    2.0 mm high   after reduction. Photographic illustrations should be in black and white glossy 

    prints.

6. References should be indicated in the text by superior numbers in square parentheses [ ] and the

    full reference should be given in a list at the end of the paper in the following examples:

1. Urbanski, T., Chemistry and Technology of Explosives, Pergamon Press, Oxford, Vol.4, pp.

    577-585 (1984).

2. Derr, R. L. and J. R. Osborn, "Composite Propellant Combustion," AIAA J., 8(8), 1488 (1970).

3. Dodohara, H. A., "Process Development of a Low Vulnerability Ammunition (LOVA) Plastic

    Binder Gun Propellant," Joint Symp. Compatibility of Plastic/Materials with Explosives

    Processing Explosives, Blacksburg, Virginia, Oct., pp.311-323 (1980).

      7. Table of Key Words relating to the researches should be typed in a sheet within 5 words.